Defender Univers - Bolt Work

1-lock operation: lock with standard footprint or Code-Combi K, 2-lock operation: locks with standard footprints (opt.), 3-sided, gear drive

Overview

Defender Univers with option ZSB
Defender Univers with option ZSB

The 3-sided bolt work is characterised by its flexibility. It can be operated by maximal two locks with standard footprints or by one electronic lock combination 82021 Code-Combi K. In case of a 2-lock operation the locking order is not defined.

The bolt work can be supplied optionally with an integrated relocker and a lock driven blocking slide.

Features

Bolt work
Dimensions base plate 210 x 235 mm

Installation applications
- 1-lock operation:
  1 lock with standard footprint, admissible mounting position of lock: vertical, bolt down, bolt throw 8.7 - 12 mm
  or
  1 lock 82021 Code-Combi K, admissible mounting position of lock: horizontal, bolt right, bolt throw 12 mm
- 3-sided (front shaft I, upper shaft II, lower shaft III)
- Shaft throw 22 mm, opening angle of handle 75°
- Shaft connections: Ø 8.2 mm and elongated hole 6.4 x 13.6 mm, Ø 6.4 mm
- Lock mounting: 4 x ¼” BSW threaded bushes
- For right hand doors, opening clockwise

Steel blank

Gear drive with follower 8 mm

Weight approx. 2,180 g

Technical Data

BoltworkOrder code
Defender Univers - standard84031
OptionsOption code
Prepared for slide bolt technologyVSR
Prepared for 2-lock operation (locks with standard footprints),mounting position of locks: vertical, bolt down, bolt throw 8.7 - 12 mmZSB
Steel chromatedOCH
Integrated relocker, detent in blocking positionREI
Manganese steel plate as drilling protection 1.5 mm thickMNB1.5
Guide pins for tightening cord
NB: This option is not suitable for lock 82021 Code-Combi K with “additional blocking slide”
(3 118 000 070).
FSD
For right hand doors, opening counter-clockwiseSRG
For left hand doors, opening counter-clockwiseSLG
For left hand doors, opening clockwiseSLI
Lock mounting: 4 M6 threaded bushesSVG
Special types on request 
AccessoriesOrder number
Additional blocking slide with 4 plastic bushings (only for Code-Combi K 82021)
NB: This option is only suitable for lock 82021 Code-Combi K with “blocking drive pin”
(option SSD).
3 118 000 070